How I get easy approach to 100-105 dumps Cisco Certified Professional? The Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) (100-105 ICND1) exam is a 90 Minutes (45-55 questions) assessment in pass4itsure that is associated with the CCENT, CCNA Routing & Switching, CCDA, CCNA Security, CCNA Wireless certification. “Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)” is the exam name of Pass4itsure Cisco 100-105 dumps test which designed to help candidates prepare for and pass the Cisco 100-105 exam. Most important Cisco 100-105 dumps ICND1 exam video practice questions vce online.
Today’s importance of Interconnecting Cisco Networking Devices Part 1 (ICND1) v3 exam is increasing because of high demand of ICND1 https://www.pass4itsure.com/100-105.html dumps and from every passing day all the things are being converted to CCENT and with that every coming day is bringing enormous advancements in Interconnecting Cisco Networking Devices Part 1 (ICND1) v3 test field.
[Latest Cisco 100-105 Dumps Certification Center From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWeVQ5WUxjZG1Idnc
[Latest Cisco 200-105 Dumps Certification Center From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWWWw0QXQxY3R1X1E
Up to the immediate present Cisco 100-105 dump exam cram:
Question No : 338 – (Topic 1) Which transport layer protocol provides best-effort delivery service with no acknowledgment receipt required?
A. HTTP
B. IP
C. TCP
D. Telnet
E. UDP
100-105 exam Answer: E
Explanation:
UDP provides a connectionless datagram service that offers best-effort delivery, which means that UDP does not guarantee delivery or verify sequencing for any datagrams. A source host that needs reliable communication must use either TCP or a program that provides its own sequencing and acknowledgment services.
Question No : 339 – (Topic 1) Refer to the exhibit.
Mary is sending an instant message to Robert. The message will be broken into a series of packets that will traverse all network devices. What addresses will populate these packets as they are forwarded from Router1 to Router2?
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Answer: B
Explanation:
The Source and Destination IP address is not going to change. Host 1 IP address will stay as being the source IP and the Host 2 IP address will stay the destination IP address. Those two are not going to change. For the MAC address it is going to change each time it goes from one hope to another. (Except switches… they don’t change anything) Frame leaving HOST 1 is going to have a source MAC of Host 1 and a destination MAC of Router 1. Router 1 is going to strip that info off and then will make the source MAC address of Router1’s exiting interface, and making Router2’s interface as the destination MAC
address. Then the same will happen… Router2 is going to change the source/destination info to the source MAC being the Router2 interface that it is going out, and the destination will be Host2’s MAC address.
Question No : 340 – (Topic 1) A workstation has just resolved a browser URL to the IP address of a server. What protocol will the workstation now use to determine the destination MAC address to be placed into frames directed toward the server?
A. HTTP
B. DNS
C. DHCP
D. RARP
E. ARP
100-105 dumps Answer: E
Explanation:
The RARP protocol is used to translate hardware interface addresses to protocol addresses. The RARP message format is very similar to the ARP format. When the booting computer sends the broadcast ARP request, it places its own hardware address in both the sending and receiving fields in the encapsulated ARP data packet. The RARP server will fill in the correct sending and receiving IP addresses in its response to the message. This way the booting computer will know its IP address when it gets the message from the RARP server
Question No : 341 – (Topic 1) Which protocol uses a connection-oriented service to deliver files between end systems?
A. TFTP
B. DNS
C. FTP
D. SNMP
E. RIP
Answer: C
Explanation:
TCP is an example of a connection-oriented protocol. It requires a logical connection to be established between the two processes before data is exchanged. The connection must be maintained during the entire time that communication is taking place, then released afterwards. The process is much like a telephone call, where a virtual circuit is established–the caller must know the person’s telephone number and the phone must be answered– before the message can be delivered.
TCP/IP is also a connection-oriented transport with orderly release. With orderly release, any data remaining in the buffer is sent before the connection is terminated. The release is accomplished in a three-way handshake between client and server processes. The connection-oriented protocols in the OSI protocol suite, on the other hand, do not support orderly release. Applications perform any handshake necessary for ensuring orderly release. Examples of services that use connection-oriented transport services are telnet, rlogin, and ftp.
Question No : 342 – (Topic 1) Refer to the exhibit
If the hubs in the graphic were replaced by switches, what would be virtually eliminated?
A. broadcast domains
B. repeater domains
C. Ethernet collisions
D. signal amplification
E. Ethernet broadcasts
100-105 pdf Answer: C
Explanation:
Modern wired networks use a network switch to eliminate collisions. By connecting each device directly to a port on the switch, either each port on a switch becomes its own collision domain (in the case of half duplex links) or the possibility of collisions is eliminated entirely in the case of full duplex links.
QUESTION 343:
Which of the following questions should be asked about open architecture when purchasing CTI tools?
A. How easy is it to use the program’s features day after day?
B. Can you record and edit speech messages and their scripts without leaving the main program?
C. Does the software vendor allow you to add ready-to-use modules to applications with a minimum of trouble?
D. Can you easily create and edit scripts for all speech messages in your application?
Answer:
QUESTION 344:
Most vendors support up to ______ voice line(s) on a single PC.
A. 1
B. 8
C. 16
D. 24
100-105 vce Answer:
QUESTION 345:
Which operating system is preferred for CTI development?
A. 16-bit
B. 32-bit
C. TAPI
D. The operating system that is most familiar to the developer
Answer:
QUESTION 346:
What is a good measure to use when evaluating system efficiency?
A. One second or less touchtone response time
B. A blocking factor of less than 2 percent
C. Fewer than two system errors per 1,000 calls
D. .93 milliseconds or less hard disk access time
100-105 exam Answer:
QUESTION 347:
What is considered standard performance for voice line support on a PC?
A. 4 lines
B. 6 lines
C. 12 lines
D. 24 lines
Answer: D
QUESTION 348:
What is considered acceptable performance for CTI tools?
A. A minimum of 50,000 speech messages
B. Online support services for developers
C. 1.5-second response time for a voice system
D. 32 voice lines per PC
100-105 dumps Answer:
QUESTION 349:
Why should your script language statements emulate C as much as possible?
A. The software will run more efficiently.
B. The scripting will simplify the developers’ jobs.
C. C works with open application interfaces.
D. C offers the simplest command set toolbox.
Answer:
QUESTION 350:
Which hardware factors affect system performance?
A. Processor speed, monitor size, and sound card memory
B. System memory size, processor speed, and disk access speed
C. Disk access speed, PC card bandwidth, and system memory size
D. Sound card memory, monitor size, and PC card bandwidth
100-105 pdf Answer:
QUESTION 351:
Which of the following questions might you ask about application generators when you consider purchasing CTI tools?
A. How easy is it to use the program’s features day after day?
B. Can you record and edit speech messages and their scripts without leaving the main program?
C. How many voice lines can be supported in a single PC?
D. What do the script language statements look like?
Answer: A
QUESTION 352:
Before LANs existed, the most common data networks were:
A. Wireless networks.
B. MANs (metropolitan area networks).
C. WANs (wide area networks).
D. Mainframe networks.
100-105 vce Answer: D
QUESTION 353:
Which of the following components was commonly found in early LANs?
A. Mainframe computers
B. Personal computers
C. Cable modems
D. Distributed applications
Answer:
QUESTION 354:
Which of the following are NOT services provided by a modern-day LAN?
A. Shared database
B. Interstate connectivity
C. Shared printers
D. Internet connection
100-105 exam Answer: B
QUESTION 355:
Which of the following geographic scopes would be served by a single LAN?
A. A metropolitan area
B. Corporate offices in multiple states
C. A single building
D. A multinational corporation
Answer: C
QUESTION 356:
Which of the following is NOT an advantage of a LAN?
A. Reducing network cabling expense
B. Reducing the number of printers or other peripherals
C. Providing electronic mail
D. Sharing files
Answer:
QUESTION 357:
A LAN can be thought of as a:
A. Distributed processing network.
B. Mainframe processing network.
C. Public access network.
D. Dumb terminal network.
100-105 dumps Answer:
QUESTION 358:
The physical arrangement of a LAN’s nodes is called its:
A. Architecture.
B. Design.
C. Structure.
D. Topology.
Answer:
QUESTION 359:
Which of the following are not examples of network nodes?
A. Backbone cable
B. Database server
C. Printer
D. User workstation
100-105 pdf Answer: A
QUESTION 360:
Which of the following terms is used to define the way a node places a signal on the network?
A. Protocol
B. Access method
C. Topology
D. Interconnect
Answer:
QUESTION 361:
Protocols and access methods are components of a network’s:
A. Topology.
B. Transmission system.
C. Cabling.
D. Architecture.
100-105 vce Answer:
QUESTION 362:
Which of the following has helped to improve interoperability between network hardware devices?
A. Increased bandwidth on the public network
B. Adherence to open standards
C. Widespread adoption of a single vendor
D. Cable that can support multiple access methods
Answer:
QUESTION 363:
Which of the following terms is used to describe a set of rules used when
establishing communication?
A. Access method
B. Standard
C. Protocol
D. Topology
100-105 exam Answer:
QUESTION 364:
Which of the following LAN technologies improves portability of network devices?
A. Wireless networking
B. Digital subscriber lines (DSL)
C. Fiber optic cabling
D. Faster access methods
Answer:
QUESTION 365:
Which of the following have been instrumental in helping the home network gain popularity?
A. Proprietary standards
B. Less expensive database servers
C. Home security systems
D. Shared high-speed Internet connections
Answer:
QUESTION 366:
Examples of bus-based networks include:
A. Ethernet and token ring.
B. AppleTalk and token ring.
C. Token ring and LocalTalk
D. Ethernet and AppleTalk.
100-105 dumps Answer: D
To pass Cisco 100-105 dumps test, one requires highly skilled and fully prepared CCENT 100-105 braindumps professionals who can handle every assigned task skillfully and with expertise. Now a day ICND1 100-105 professional’s tasks are very laborious and extensive to handle.
Interconnecting Cisco Networking Devices Part 1 (ICND1) v3 exam professional are assigned with number of tasks as coding the https://www.pass4itsure.com/100-105.html dumps product, its evaluation then the program launching, then testing and evaluating its outcomes, this is all like to cross a milestone.